The bathroom mirror in your home shouldn’t just reflect your
image when you look into it, it should also show your design tastes and echo
the motif of the space it occupies. A
mirror can be displayed in numerous ways to cultivate the look you want for
your bathroom. For instance, a regal Louis XIV gilded frame hanging
commandingly over a vanity is going to make a far different statement than a
simple, unframed mirror fastened to the wall by austere chrome clips. Each
style mirror has its natural place, although sometimes you might have the urge
to take a risk. What about throwing that Louis XIV piece into a stripped down
modernist bathroom setting? A statement would definitely be made – whether or
not that statement is appreciated is another matter altogether…
A new mirror design trend has emerged over the past couple
of years that you might have encountered on Pinterest or Houzz and the like.
The “standoff” or “floating” mirror has taken off in a big way recently. This
is generally a no-frills, unframed mirror thrust out from the wall anywhere
from ½” to a few inches giving it the illusion that it is hovering in air.
Because it does not lay flush with the wall, the sharp lines that inform the
mirror’s perimeter are emphasized and the mirror achieves a presence that is
not typical to unframed pieces as it breaks free from the wall plane.
Standoff mirrors rely upon special hardware or a surface
built out from the attachment wall to achieve the “hover” effect. If you want
to go the hardware route, metal pegs secure the corners through holes drilled
into the mirror fixed to round fasteners on the mirror’s surface. This option
is only possible for smaller pieces, otherwise the mirror’s weight places too
much stress on the holes and crack-outs are likely. The built out approach is
achieved by attaching addition material (extra drywall or 2x4s) to the surface
behind the mirror and adhering hangers to the reverse side of mirror for mounting.
It’s possible to push the novelty of standoff mirrors even
further by incorporating sandblasted elements and stark lighting, techniques
that owe gratitude to the conceptual artwork of pioneers, like James Turrell
and Olafur Eliasson. Sandblasting and mirror lighting play together winningly;
creating a warm, diffuse glow as light filters through the opaque sandblasted
portions. This effect can be used in a number of charming ways, such as “the
framed look” or “counter-relief lighting”. Check out examples of each
below.
Framed-Look/Counter-Relief Lighting |
Of course, some people skip the sandblasting altogether
and just let the lighting create the drama. Notice, in the photo above, how it spills out over the
edges of the mirror like a morning sun breaking the horizon. Forgive the attempt at poetry, but this lighting does smack of the Epic.
Now back to the mundane - if you want to produce as similar effect in your new bathroom, remember to talk to your electrician about how to ready the space for backlighting and what kind of lights will work best.
Stand-off mirrors can add a contemporary edge to a bathroom,
especially when sandblasting or creative lighting is incorporated. They also complement other contemporary pieces, like frameless showers, perfectly. Whether this
look will age a bathroom in the future remains to be seen. My hunch is that this style of mirror display will become a new classic. Either way, for the time being, standoffs
standout like no other bathroom feature.
On the built-up no showing hardware versions...what does the hanger that attached to the mirror and wall look like? Where can I get it in Houston Texas? And what should I be asking my glass guy for? He keeps talking about an "L" Bracket at the bottom of the mirror. I don't see an "L" Bracket anywhere in these photos of yours. Please help! I want what your doing!
ReplyDeleteHi Michele. It sounds like your glass guy knows what he's talking about. It is an "L-bracket" or "angled metal" that the mirror actually rests on. It doesn't need to extend all the way to the edge, so that's probably why it isn't noticeable in the photo. We get our metal from Stylmark (a MN company), and you could probably order from them. If you go on their website, check out "Hardware" and then "Angle" to find what you need. Good luck!
ReplyDelete